Making supports

Yesterday, when I removed the seat rail I noticed that there was some movement in the back of the car.
Not much, but just to be on the safe side I started to make supports for under the car.

I took off the rear wheels and at the rear of the frame I noticed some holes that I could use. A few plates were made and bolted in place. A few pieces of tubing where cut and welded to the plates I made.

The rear of the car is now supported on that frame.

I then turned my attention to the front of the car and found some holes in the frame to make the second support.

Left and right the plates are already mounted.
The rest will be for Monday.