Preparing for sand blasting

Today I started with the removal of the black undercoating of the car.

We removed it from the inside of the front fender (The portion that was not replaced).
And from the underside of the rear axle and trunk.
And the Rear fender.

 On the inside of the trunk we removed the bondo that was applied to the seems of the body panels. They where cracked and let water to the seems. the proted.

 On the inside of the rear fender near the trunk lid bondo was removed. Its hard to blast it off.

 After some cleaning we put the car on a Big Cart with an open frame to give clearance for blasting the underside of the car.

And that was it for today.