After the holiday break

Today I started working again on the car after a holiday break.
So Here we go.

We first started with the door . The character line was showing a small dent when looked from the side. Some filler was added and sanded smooth again.

 Next we took some measurements on the front fender (passenger side). Then the fender was dismounted and the tip at the top near the door was welded. The gap was to large.

 Nest the inside of the engine compartment was taken car of. Few places where showing some spots where it was welded. With some filler they were leveled out and sanded smooth.

 Tomorrow we will continue with more items that needed our attention.