Preparation for filler is started.

Today we finished some more items that needed our attention.

 The fenders were both touched up on the edges and prepared for sealer.

 The rough edges of the sealer on the front of the car are smoothed.

 Sealer on the fenders at the door side and at the front side are applied.

 The edges of the door are sanded smooth and sealer has been applied around the seem.

The inside rear fender lip was smoothed with filler and sanding.

 The rocker panel on the passenger side near the front fender was touched up.

 And then it was time to start sanding the primer smooth for the application of the filler.
We stated on the door sill of  the passenger side. Its hard to see the difference but you sure can feel it.