Cutting out the floor.

Today I started where I ended yesterday. Removing more floor parts.
I started at the passengers side by cutting out the last section of the floor that is going to be replaced.

Next I started removing the piece between the 2 frame rails.

And then the drivers side was cut out.

Next came the cross member. The last piece of the floor was removed.

Next I started with the removing of the front rocker-box on the passenger side.
There I noticed that there was severe rotted parts.

 If you look closely you can see that in the corner there are holes. They were covered with Bondo to camouflage it.

 Then the rocker box is cut out.

And the pile of scrap is getting bigger.