The Floor pan did arrive

Last week on Thursday the floor-pan finally did arrive.

 So today I started with cutting out the floor.
First the rear section just behind the seat rail was removed.
By drilling and with the cutoff-wheel.

Then the sections above the rear rocker boxes were chiseled out.

 In the picture above you can see the previous repair done to the car. A piece of plumbing socket was put in place to hold the walls of the frame rails apart.

Then the piece under the frame rail was cut out.

I now have a nice space to work on the rest of the parts that have to come out.

And this is the pile that came out.