Installing the seats

I started with the installation of the emergency flash light switch.

 I then cleaned the interior of all the tools and debris on the carpet and turned some plastic washers .

 To replace the white washer. They are to be mounted under the window crank.

 Next it was time to put teh rear seats in place.

 And then the front seats could be in stalled. First the passenger side.

 And then the driver side.

 Next I installed the steering wheel and trial fitted the console between the seats. It still has to be tightened down.

I also have to install the tubes for the airco so that the condense could escape to the outside. But it will have to wait until next week.