Sanding some more

Today I was able to see the shiny spots, these spots need some more sanding.
Otherwise the paint has trouble to adhere.
I also sanded the repaired part around the taillight. Then everything got taped off to prevent over-spray.

 Next a thin coat was applied with a primer in a can. And that gave trouble.
On some parts where there is the base coat it is working up. So I will have to sand again and use an other primer.

 While this is drying I did some more sanding op the shiny spots.

I now will have to wait once more until tomorrow to see if there are still some spots that need sanding.